Dash DSY007SS Yogurt Maker Disassembly

Escrito Por: Ava Wong
  • Comentários: 0
Dash DSY007SS Yogurt Maker Disassembly

Dificuldade

Moderate

Passos

3

Tempo necessário

5 minutes

Introdução

This is a guide to taking apart the Dash DSY007SS Yogurt Maker. The steps provided will help an individual access the main heating component of the yogurt maker. This repair may be needed if the yogurt maker no longer heats up as intended. Having access to the circuit board will allow the user to identify the issue.

  1. DwQBUBssEnYlDNRS
    DwQBUBssEnYlDNRS
    nFMndYoI5Min6pTW
    1PZMF1c3YLgCqvIB

    • Remove the lid of the yogurt maker.

    • Flip the yogurt maker over so the bottom is facing upward.

    • Remove four 3.5mm screws from the bottom using a Phillips #00 screwdriver.

  2. tGTpgFLZcxUZflqK
    tGTpgFLZcxUZflqK
    xVbGhBeStsuDJo6O
    VWfRKjRsPEEVuHOU

    • Separate the two halves of the yogurt maker.

    • The power cord and the heating wire are still connected. This means that the yogurt maker will not be completely separate. However, the two pieces can be laid down to expose the internal wiring.

    • Remove four screws holding the power cable in place using a Phillips #00 screwdriver.

    • Remove the plastic that is holding the cord down.

  3. mnHWttMgIHjIuLcg
    mnHWttMgIHjIuLcg
    XQL1MxsvMTvtQXTY
    OUBZArQUxqGWhr5P

    • Gently pull up on the circuit board and wiggle it side to side to release it from the two retaining tabs.

    • You now have access to the main circuit board that allows transfer between the power supply and heat of the appliance.

Autor(a)

Ava Wong

Membro desde: 10/09/25

147 Reputação

0 comentários