Cobra 29 LTD Classic Outer Cover Replacement

Escrito Por: Chase
  • Comentários: 6
Cobra 29 LTD Classic Outer Cover Replacement

Dificuldade

Easy

Passos

11

Tempo necessário

15 - 20 minutes

Introdução

This outer cover is the main cover that protects the inner electrical components. Perform the guide on a flat non-conductive surface to avoid electrical shock and damage to your device.

  1. ePvXXqIskEeDt3rE
    ePvXXqIskEeDt3rE
    wuRcDdttwaNHEL4g

    • Turn the power switch, the leftmost knob, counterclockwise to off.

  2. MHaoPyusxO1fdHUM
    MHaoPyusxO1fdHUM
    PLAWU6BBUOJJmhdN

    • Turn the device around and firmly pull the power cable plug to remove it from the radio.

    What is the part number of the connector? What is the part number of the correct fused power cord?

    continental59 -

  3. Rsn2uDHEhUtmHkln
    Rsn2uDHEhUtmHkln
    JMnkVOonFSrMAb6l

    • Unscrew the securing cap counterclockwise from the antenna connector.

  4. xCMkIZv3kItGLEIj
    xCMkIZv3kItGLEIj
    eThimSUNgTCN3jmT

    • Gently pull the antenna cable to remove it from the back of the radio.

  5. TbH6kKQA3BroPpVy
    TbH6kKQA3BroPpVy
    HwqDymUIUSdhDRwb

    • Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.

    My mike will.not key

    Keith Laws -

    My microphone will not recieve or get out

    Keith Laws -

  6. uvDgaS4RJVJc1q4r

    • Gently unplug the microphone plug.

    what is the mic wiring ?

    Tony Spainhour -

    what is the wiring on a 4 pin cobra mic .

    Tony Spainhour -

  7. 1QqXCYEtwBq11JEs
    1QqXCYEtwBq11JEs
    im6UkjSF66Z5BW5n

    • Unscrew the top four 6.0mm Phillips head screws counterclockwise on the left and right side of the device using a #1 Phillips head screwdriver.

  8. bEmV2uVGSqnuurUP
    bEmV2uVGSqnuurUP
    hQhavRwWx3BUYcyv
    Ab4SWKuCXjOoljyb

    • Gently life and remove the top cover.

  9. NYhaMtYtjiUSwFKM
    NYhaMtYtjiUSwFKM
    5OCAxwRhpnNR2Wgr
    fOaF1GqUuLdZIqqF

    • Gently set down on a hard, flat, non-conductive surface to minimize risk of shock or breaking your radio.

    • Carefully flip the radio over.

  10. WShpKPZ1CRywkmxO
    WShpKPZ1CRywkmxO
    h3oUWcBPkRCuGMpa

    • Unscrew the four 6.0mm Phillips head screws counterclockwise on the left and right side of the device that connect the remaining cover, using a #1 Phillips head screwdriver.

  11. ypKnXmBmKSavRBUP
    ypKnXmBmKSavRBUP
    SUYDw4PfMNtKRP2T
    mYutrwNXQ2aXquyY

    • Watch out for the wires connected to the speaker. These short wires will not allow you to move the cover very far.

    • Gently lift and remove the case cover.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Chase

Membro desde: 20/10/13

318 Reputação

Um comentário

where are you in the uk .i need parts for a c b radio can yiu help me . please help

Raycollins62 -