Canon EOS Rebel XS 35mm Bottom Cover and More Replacement

Escrito Por: christiansvezia
  • Comentários: 0
Canon EOS Rebel XS 35mm Bottom Cover and More Replacement

Dificuldade

Moderate

Passos

13

Tempo necessário

2 - 10 minutes

Introdução

This is a necessary procedure for replacing certain parts on the bottom of the Canon EOS Rebel XS 35mm camera (after removal of the bottom cover). This guide details how to remove the these parts and put them back in, whether they're the same parts now fixed, or a new parts. The parts include two small metal plates, washers, screws, and gears.

  1. cQPXpGdpWY2OJBkS

    • Use a Phillips #000 screwdriver to remove the 7 mm screw.

    • Use a Phillips #000 screwdriver to remove the five 4 mm screws.

  2. DhjMYAsYUJedBunu

    • With your fingers, push on the bottom cover towards the back of the camera until it clicks and separates.

  3. rP1M16Bkmd3iLEWY

    • Using tweezers or your fingers, carefully remove the five gears and set them aside temporarily.

    • These gears can fall out easily while you’re working, so keeping them organized will help prevent loss.

  4. Qqusvg5BjsKLuHLT

    • Remove the 5mm silver Phillips #000 screw.

    • Remove three 4mm Phillips #000 screws.

  5. 2iRBKQV2HUqqH265

    • Remove the silver plate with tweezers or fingers.

  6. EJXaLZFLHeBWwFZF

    • Be mindful of the spring attached to the plastic piece. Do not lose it.

    • Remove the plastic black part.

  7. OwAtvZRvKcKcMaN6

    • Remove the black gear with tweezers or fingers.

  8. dnABkSenaqEOimFC

    • Remove the gear with tweezers or fingers.

  9. LUWBGrQUvACvgwmg

    • Remove the part indicated in the picture with tweezers or fingers.

  10. Ev3pKxGJ3a4vNAFX

    • Remove the part indicated in the picture with tweezers or fingers.

  11. 6lf2FQuyRVhMBANm

    • Remove the part indicated in the picture with tweezers or fingers.

  12. lLMtksXHVySk2RBG
    lLMtksXHVySk2RBG
    iIE2wpTLyBQ5H1we

    • Remove two 3mm Phillips #000 screws.

    • Remove two silver 3.5mm Phillips #000 screws.

  13. uwpTr2aWaxtYwsR5

    • Remove the second silver plate using tweezers or fingers.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

christiansvezia

Membro desde: 24/10/18

1136 Reputação

0 comentários