Introdução
I lost my charger, and they are hard to find replacements! Official ones are sold out and no third party ones exist yet.
Or, maybe you just want a USB cable!
As a note, when looking at your charger socket, there is a notch at the bottom and the flat at the top. The positive is on the left, and negative on the right. Testing with a multi meter shows a low millivolt reading in the correct polarity to how you need to supply 5v
Ferramentas
Peças
-
-
This is the base of the charger stand, there are two screws on the left and right side, just lift the rubber foot a little.
-
-
-
With the socket at the bottom, Solder a 5V lead's positive wire to the right side, and the Negative to the left side.
-
-
-
Now screw it all back together, and test. You should get a blinking led when your shaver is on the dock.
-
If it does not charge, check wiring. Make sure nothing is caught when closing the case.
-
If its intermittent, then the charging pins may have moved, just pinch them tighter together and it should work better.
-
