Introdução
This guide will walk you through the process of replacing a cracked or malfunctioning brush guard on your BISSELL SpinWave Pet. The brush guard is a key component responsible for protecting the brush, allowing the device to pick up debris while remaining in place.
If your brush guard is damaged or not functioning properly, follow this guide to replace it. Before you begin this repair, ensure your BISSELL SpinWave Pet is turned off and disconnected from any power source.
-
-
Power off the device by holding the power button down for 5-10 seconds.
-
Disconnect the device from any external power supply or charging station.
-
-
-
Gently lift the brush out of the device. If you are having trouble, try squeezing from the sides.
-
To reassemble your device, follow these instructions in reverse order.
