Bissell SmartClean 1605 Front Cover Replacement

Escrito Por: Michael Derrenbacher
  • Comentários: 0
Bissell SmartClean 1605 Front Cover Replacement

Dificuldade

Easy

Passos

4

Tempo necessário

5 minutes

Introdução

This guide is for removing the front cover of your device. If you need to replace or clean the sensor or it's wiring you will need to remove this cover.

  1. umkQQKybcPbFUf4y

    • Power off your device

  2. gTGmWHJKPPOE54LG

    • Flip your device and unscrew the marked screws using a phillips screwdriver.

  3. qsJNL3xkqAVpAgHG
    qsJNL3xkqAVpAgHG
    qLcNrSd2R3P6vil4
    QYCpTQ5d2cX6fxgE

    • Gently pry off the top half of the front cover

    • Remove the wires from the socket.

    • Don't pull the wires too hard, they can become disconnected from the plastic plug.

  4. 1sMSDYbyxwXRV12u
    1sMSDYbyxwXRV12u
    PWbW3pNSTGnSGPjg
    K6P3D14Usn5OJqyu

    • Once the top cover is removed, pry off the bottom casing.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Michael Derrenbacher

Membro desde: 27/09/17

104 Reputação

0 comentários