Introdução

This guide covers replacing a capacitor on a Beko DHR73431W Heat Pump Dryer. This can fix problems with the barrel not turning.

Since Capacitors are dangerous, if you Don't already know how to work with them safely, please consider this Guide: "How to Safely Discharge a Capacitor" a prerequisite to this one.

  1. QUuxRZBAncgGrLiW
    • Remove the two Phillips 02 (cross-head) screws securing the lid

    • Capacitors store dangerous levels of electrical current, they must be discharged before handling. To begin UNPLUG the device from the mains, and let it sit for a few hours Make sure you let the power drain before opening BEWARE: it is possible for capacitors to store a life-threatening charge for months or years.

    • Before commencing work inside or attempting to handle the capacitor, very cautiously short the terminals to ground and dissipate any residual charge.

  2. kIwhVgekwe5tlgGR
    kIwhVgekwe5tlgGR
    g63EYF5IWu5TSPTi
    Xo6BPyDKClibDg2t
    • Unscrew and remove the five Phillips 02 cross-head screws of the side panel

    • Remove the single Phillips 02 cross-head screw on the bottom

    • Remove the two Phillips 21 cross-head screws from the top

  3. 6eDWRr3VsOR6h3sM
    6eDWRr3VsOR6h3sM
    wWCtMVrNXUmLMVee
    ZPIOZfJABcZrTWng
    • WARNING! Discharge any residual current from the capacitor before continuing.

    • Remove the single Phillips 02 cross-head screw for the capacitor labeled with a large '8'.

    • Unplug the two connectors at the base of the capacitor

    Ho un problema che l’asciugatrice parte come l’accento ma subito subito dopo si blocca qualcuno mi sa aiutare a capire che problematica può avere

    Davide -

Conclusão

To continue, put in your new capacitor then follow the steps in reverse.

Daniel Grey

Membro desde: 21/10/21

162 Reputação

2 comentários

very helpful. Many thanks

Muhammad Masood HUSSAIN -

No worries, thank you

Daniel Grey -