Introdução
This guide shows how to replace the headband on the Beats Studio3 Wireless headphones (A1914). The headband connects both earcups, provides structural support, and houses internal wiring that carries sound between sides. If it’s not replaced when broken or damaged, the headphones may lose sound in one ear, fit unevenly, or completely snap, making them unusable.
Ferramentas
-
-
Use a T5 Torx screwdriver to remove the two 4.8 mm-long screws near the headband on either of the sides.
-
-
-
Uncollapse the headphones.
-
Firmly grip both sides of the hinge with your hands and pull apart until the headband is disconnected.
-
-
-
Insert the iFixit Opening Pick between black plastic and the red rubber.
-
Slide the iFixit Opening Pick across the rubber headband all the way around until disconnected.
-
To reassemble your device, follow these instructions in reverse order.
