Bambu A1 Mini Hotend Assembly Replacement

Escrito Por: not-ethan
  • Comentários: 1
Bambu A1 Mini Hotend Assembly Replacement

Dificuldade

Easy

Passos

6

Tempo necessário

5 - 10 minutes

Introdução

The Hotend Assembly (Hotend) includes the nozzle and is the final part the filament goes through before reaching the build plate.

  1. knCj1LTEiwhLhDxD
    knCj1LTEiwhLhDxD
    jfQiIgX1DZROsASf

    • Cut the filament by fully pressing the handle on the right side of the toolhead.

    • In the control window, press the up button for the extruder.

    • You do not want to need to rip the filament out of the nozzle.

  2. 5WoQ1mlOT5mCNiN3
    5WoQ1mlOT5mCNiN3
    mAHD2Qb1WuroBLJF

    • Lift the front cover in the circled spot in the photo and pull out the front cover.

  3. uvEgaIimFcLqMvlJ
    uvEgaIimFcLqMvlJ
    M6SQmAscKB4fRQDq

    • Remove the silicone sock from the nozzle.

  4. lXSaHJMMXvncjguZ
    lXSaHJMMXvncjguZ
    yFSDMLFJAy2PQ2s5
    X4yfxTIKTAoTUI1d

    • Open the front wire frame latch.

    • Then, open the solid latch.

  5. RQSJgvjSXfWjhpnq
    RQSJgvjSXfWjhpnq
    BQkbEJXkxHKFIdYx

    • Pull out the old nozzle.

  6. XldNcYVcohEbP1sv
    XldNcYVcohEbP1sv
    AXhQjnxJfQotLkrL

    • Place the new nozzle into the hotend.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

not-ethan

Membro desde: 25/05/25

681 Reputação

Um comentário

Perhaps this may be cross-referenced to various guides from the Bambu Lab wiki, such as the guide to clean the A1 series hotend.

Tai Lam -