BLU Studio 7.0 II Battery Connection

Escrito Por: Abby
  • Comentários: 0
BLU Studio 7.0 II Battery Connection

Dificuldade

Moderate

Passos

2

Tempo necessário

No estimate

Introdução

Prereq only; disconnect the battery before anything else.

  1. JtJFK5ynSrUQZKEI
    JtJFK5ynSrUQZKEI
    blxBvprHFebuVL3C

    • Using the PH00 screw driver, remove the two 3mm screws.

    • These screws may be covered by small, round black stickers. Remove the stickers to continue.

    • Remove the metal clip that connects the battery ribbon to the motherboard by lifting up. Precision tweezers work best for this part.

    • Be sure to only grab the metal clip with the tweezers, not the connector underneath.

  2. 63unmMvN4JSLs5GO

    • Disconnect the battery connector using a plastic opening tool or the flat end of a spudger.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

Abby

Membro desde: 14/05/16

852 Reputação

0 comentários