Alcatel Go Flip 3 Motherboard Replacement

Escrito Por: matthewrocha
  • Comentários: 0
Alcatel Go Flip 3 Motherboard Replacement

Dificuldade

Moderate

Passos

6

Tempo necessário

No estimate

Introdução

This guide shows how to replace the motherboard in the Alcatel Go Flip 3 keyboard. Follow the steps carefully to ensure proper reassembly.

  1. sv2PFTOsYVWUllS1

    • Place a fingernail or opening tool into the notch on the back panel of the phone.

    • Pry upwards to remove the back panel.

  2. vSE3ASgBlixRiiIp

    • Remove the battery by lifting it up from the small indent.

  3. A6SlRRrYGJZgOqFT

    • Remove the nine 1 mm screws from the midframe using a Phillips #00 screwdriver.

  4. Zt5R6KVR5VOwfs65
    Zt5R6KVR5VOwfs65
    a1XWN5WcGXeREBDa

    • Use a spudger to pry the midframe away from the phone.

  5. NYe1tkY51nDUsXt4
    NYe1tkY51nDUsXt4
    1VPcFpBXEYGjcPNU

    • Use a spudger to disconnect the video cable from the motherboard.

    • Make sure not to damage the video cable when disconnecting it from the motherboard. Hold it up correctly.

  6. L5SHBEdrKQhI1P2O
    L5SHBEdrKQhI1P2O
    cEeDT2sHKDUK5o1g

    • Use a spudger to pry the motherboard out of the phone.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

matthewrocha

Membro desde: 09/09/25

159 Reputação

0 comentários