Introdução

In this guide, you will learn a fast and easy way to change the front side marker lights on a 2021 Toyota Highlander Hybrid.

This replacement would be needed when the light bulb burns out or when the lens is cracked or foggy. Replacing the front side marker light on a 2021 Toyota Highlander Hybrid is a simple process that can be done without removing the bumper.

To access the bulb socket, you will need to reach behind the headlight assembly from inside the engine bay. Some higher trim Highlanders use sealed LED bulbs for the side marker light. These are not user-replaceable and require a dealer visit. Most hybrid trims, however, use a standard replaceable bulb. Here is a link with additional information on this Toyota Light Bulb Replacement repair.

Before you begin, make sure your SUV is off and in park.

  1. X5OYWG5f6Ad25BFU
    X5OYWG5f6Ad25BFU
    AqmVSfrxAEJCtqJY
    AaxVTsZDfjWkdoWB
    • Pull the release lever located on the driver's side, near the steering column.

  2. MC6ZHISfooNjNHrp
    MC6ZHISfooNjNHrp
    QW3OCOfK6t6PJtUv
    HmoYWXXr1XgjaGFS
    • Go to the front of the car and find the secondary safety latch near the Toyota emblem, and push it to the left.

    • Lift the hood and secure it with the support rod.

  3. UVtsC4E6aby6vXab
    UVtsC4E6aby6vXab
    4ICrTRARKE5To5Sp
    QMjHSCEQ26keXeuj
    • Wait until the bulb has cooled completely before touching it to avoid burns.

    • Locate the marker light bulb socket.

    • It is typically located on the back of the light housing, behind the headlight assembly.

  4. uqURuWOQEgb5TvQf
    uqURuWOQEgb5TvQf
    SsEEWhLthHoVCCD1
    rPi6tfHotSY2fNIy
    • Gently turn the bulb socket a quarter turn counter-clockwise to unlock it.

    • Pull the socket directly out of the housing.

    • Don’t pull on it too much, or you could risk disconnecting the cables attached to the socket.

  5. bFOsUcpl2EAxS4jt
    bFOsUcpl2EAxS4jt
    cEOZ2ntaurJXcWlQ
    bDOPGDPMQ4q5LqRu
    • Pull the old bulb straight out of the socket.

  6. XbIPeEHyUNVEtQTE
    XbIPeEHyUNVEtQTE
    O1RLFKgfEQNgpctc
    • Align the new bulb with the socket and push it firmly into place.

    • Try to shake the socket to ensure the bulb is securely in place.

  7. J3TqACeIfxvdQhQH
    J3TqACeIfxvdQhQH
    sK4ULQmqQnxNLbYI
    • Insert the light socket into the housing.

    • Twist it clockwise to secure it in place.

    • You should hear a click or feel it click into place. That’s how you know it is secure.

  8. dULjTfTBHK6eZVFs
    dULjTfTBHK6eZVFs
    MUj2jWgFJrP4oyt1
    • Give it a light wiggle to ensure it's secure.

    • To prevent fire or damage, make sure bulbs are fully seated and locked.

  9. AenZ1A2px52cvvPJ
    AenZ1A2px52cvvPJ
    EM1SIbTvxfDEMGm6
    • Turn on the headlights and set them to high beams.

    • Walk to the front of the car to check if the lights are working.

Conclusão

Take your e-waste to an R2 or e-Stewards certified recycler.

Bridgett Gamez

Membro desde: 30/09/25

199 Reputação

0 comentários