Introdução
A non functioning dome light can be the result of a burned out light bulb. This guide will show you how to replace it.
Peças
-
-
Grab the light fixture at the switch side and pull it loose.
-
Pull the power connector out by pushing on the retaining clip and pushing from below simultaneously.
-
-
-
Grab the bulb and push it out of the fitting.
-
Insert the new bulb by slotting it in on the flexible end and pushing it in. Make sure the other end is slotted into the fitting.
-
If you are using a LED light, make sure you turn the lights towards the lens after installation.
-
Conclusão
To reassemble your device, follow these instructions in reverse order.
