2006 Acura RSX Fog Light Bulbs Replacement

Escrito Por: Julius Marcoviche
  • Comentários: 0
2006 Acura RSX Fog Light Bulbs Replacement

Dificuldade

Moderate

Passos

6

Tempo necessário

15 minutes

Introdução

This is a guide on how to replace blown foglight bulbs on a 2006 Acura RSX. This repair will be needed if your foglight decides to go out and stop working completely. This should be a simple and straightforward repair.

  1. NpsDFOvXqnIA16Lc
    NpsDFOvXqnIA16Lc
    hIAZiqYWPoLMKWut

    • Get inside your car and turn your steering wheel to the left/right, depending on which side you're working on.

    • This isn't necessary, but it will make the process much easier.

  2. TvfwiWylCpTLY2rC
    TvfwiWylCpTLY2rC
    E5MLswqTlb2UteAh

    • Now you'll want to unplug the bulbs. To do this, pull the clips apart and pull the plug out.

    • To pull the clips out, you have to grab them from the top and pull them outwards and they should come out.

    • The plug should come out very easily after pulling the clips.

    • If you're having trouble finding the clips for the plugs, they're near the top of the plug where it connects to the bulb.

  3. ufoDhiOC5333oTXV
    ufoDhiOC5333oTXV
    lWiqLDE4e4rUKADF

    • To remove the old bulb, you will have to twist to the right and pull it out.

    • To pull the bulb out, pull it towards you after twisting it, and it should come straight out.

    • If twisting it to the right doesn’t work, you should be able to twist it to the left to remove it.

  4. otAUjBGcKH3KoULH
    otAUjBGcKH3KoULH
    3vPAJdQNnptvMsfZ

    • You want to take your new bulb and do everything that you did earlier, but in reverse.

    • That means inserting the bulbs by twisting them in and plugging them in.

    • I decided to replace the halogen bulbs with LEDs, that’s why they look different.

  5. dysmIeHHeGHLuvVq
    dysmIeHHeGHLuvVq
    xpgYFTnlUaybmcDk

    • You want to make sure everything is where it should be before you started working.

    • Make sure the bulb is secure in place and that the plug is nice and tight into the bulb.

  6. KQEFMVngcpdPtG1x

    • Now, you want to test the foglights to see if they work.

    • If they don't turn on you should check your connections.

Autor(a)

Julius Marcoviche

Membro desde: 20/10/25

133 Reputação

0 comentários