Introdução

This guide is specifically to replace the cabin lights of a 2006-2013 Toyota Corolla which is also known as a Toyota Karra, Hepburn, Toyota Sprinter, and Toyota Auris. Cabin lights are a safety feature so when using the car at night the driver and passengers can see when entering and exiting the vehicle and is a useful feature if it's necessary to see something inside the cabin when driving.

Cabin lights are located in the interior of your vehicle to provide more light in the passenger seat. If this light burns out, follow this guide to replace the cabin light bulb.

Before proceeding with this repair, make sure to have a Festoon Bulb that is 12 volts by 8 Watts (12V-8W). Also, make sure that your car is off and in park.

  1. SmMAeOTwhVXPRob1
    • We will now begin the repair to replace Cabin Lights for a 2006-2013 Toyota Corolla.

  2. ocNY2Ap3Ir54yHNm
    ocNY2Ap3Ir54yHNm
    tJCAgyrfVghUfACV
    QTQLKbsXDTTDk3TA
    • Insert the end of a spudger into the narrow openings at the bottom of the light cover and pry up to release the light cover.

    • After completing this step, the lid will be loose and could fall on your face if you are not careful and catch the lid on time.

  3. Xlq2dd4IGY3qIXff
    Xlq2dd4IGY3qIXff
    mFDCspSSBIcdmkFT
    • Remove the light cover.

  4. mTYqKUgc4rrq1DOH
    mTYqKUgc4rrq1DOH
    BFMX6gg1SrESceFJ
    1pEtZvopHUQgV3Sq
    • Pull back the mechanism holding the bulb in place and remove the old bulb.

  5. NE1YslWQbkL2mm35
    NE1YslWQbkL2mm35
    UgyJHGMjmKqHpu5G
    • Insert the new bulb into the end of the holder with the hole.

    • There is no specific bulb orientation for this step, either side can be inserted, and the light will still work.

  6. v2mMchafOcsbsg21
    v2mMchafOcsbsg21
    QPd3KySgCMrIK2UL
    LRytGZivsuJmMXJf
    • Place the other end of the bulb so it slides easily into the end of the holder.

  7. NrRQuUF4lSYKi4wS
    NrRQuUF4lSYKi4wS
    PoU3mqMlR2LHik4F
    QKy2IxsYstMbU1nf
    • Insert the clip side of the light cover into the two slots for the correct orientation.

  8. MVFhDeXrC3IBeug4
    MVFhDeXrC3IBeug4
    awRLRQfvJhVLNTer
    • Press the lid down to reattach.

    • The lid should snap back into place.

  9. 6XosDJAIZenurehN
    • Slide the switch to turn the cabin light on. If it doesn't work, repeat steps 1-11 with a new bulb.

Conclusão

You have now replaced your 2006-2013 Toyota Corolla Cabin Lights!

KennethM

Membro desde: 21/04/25

169 Reputação

0 comentários