iD14 MKII

Released in early 2021, the Audient iD14 MKII is a compact 10-in 6-out USB audio interface. It’s the second generation of the original iD14, which was launched in 2015. The iD14 MKII features two fully analog Audient Console Mic Preamps, Advanced 32-bit AD/DA converters, and the option to expand via ADAT iD14 packs. Key upgrades included USB-C 3.0 connectivity, improved headphone outputs, and 125.5dB dynamic range.

• Announced: January 2021

• 2 x Channel Knobs (Mic/Line Input)
• 2 x Phantom Power Switches
• 1 x Volume Knob
• LED Main Meter
• Main Output Select Button
• iD Button
• Headphone Output Select Button
• USB-C 3.0 Connection
• ADAT Optical Input
• 2 x Speaker Outputs
• 2 x Mic Line Inputs
• Instrument Input
• Dual Headphone Outputs (3.5mm and 6.35mm)

• Range: +58dB
• Linup: 12dBu = 0dBFS
• THD+N @ 0dBu: 0.1%
• SNR: 100dBu A-Weighted
• Frequency Response - Min Gain: ±0.5dB 10Hz to 20kHz
• 1/4” TS Jack: Tip (Hot) & Sleeve (Shield)

• Gain Range: 58dB
• Lineup: 12dBu = 0dBFS
• Mic Max Input Level: 12dBu
• Max Input Level: 21dBu
• Input Impedance (Mic): 2.8k
• Input Impedance (Line): >8k
• THD+N @ 0dBu: 0.00170%
• THD+N @ 0dBu Max Gain: <0.04%
• SNR: 101dBu A-Weighted
• EIN: 129dB A-Weighted
• CMRR @ 1k:>75dB
• Crosstalk: >-100dB
• Frequency Response - Min Gain: ±0.5dB 10Hz to 40kHz
• Phantom Power: (48V +/-4V @ 10mA/Channel)
• XLR Combi Female: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
• 1/4" TRS Jack: Tip (Hot), Ring (Cold) & Sleeve (Shield)

• THD+N @ -1dBFS: 0.001%
• Dynamic Range: 120dB A-Weighted
• CMRR: >80dB
• Frequency Response: ±0.5dB 10Hz to 40kHz

• Lineup: 12dBu = 0dBFS
• THD+N @ -1dBFS: 0.0006%
• Dynamic Range: 125.5dB A-Weighted
• Crosstalk: >120dB
• Frequency Response: ±0.1dB 10Hz to 40kHz
• 1/4" TRS Jack: Tip (Hot), Ring (Cold) & Sleeve (Shield)

• Lineup: 18dBu = 0dBFS
• THD+N @ -1dBFS: 0.0009%
• Dynamic Range: 125.5dB A-Weighted
• Crosstalk: >116dB
• Frequency Response: ±0.25dB 10Hz to 40kHz
• Max Level @ 30R: 2.59V Peak, 1.827V RMS, 223mW
• Max Level @ 62R: 4.18V Peak, 2.95V RMS, 280mW
• Max Level @ 600R: 7.72V Peak, 5.46V RMS, 100mW
• 1/4” TRS Jack: Tip (Left), Ring (Right) & Sleeve (Shield)

• MIN Requirement: 0.9A @ 5V >=USB 3.0 Port
• MAX Requirement: 1.5A @ 5V USB-C: Provides higher headphone outputs levels
• No. of Input Channels: 10
• No. of Output Channels: 6
• DSP Mixer Latency Round Trip (in-to-out): 44.1kHz 0.65mS
• DSP Mixer Latency Round Trip (in-to-out): 48.0kHz 0.6mS
• DSP Mixer Latency Round Trip (in-to-out): 88.2kHz 0.33mS
• DSP Mixer Latency Round Trip(in-to-out): 96.0kHz 0.31mS

• Length: 4.72 in (120 mm)
• Width: 6.81 in (173 mm)
• Height (without knobs): 1.57 in (40 mm)
• Height (w/ knobs): 2.44 in (62.1 mm)

• 2 x Audient Console Mic Pre’s
• Class Leading Converters
• 1 x JFET Instrument Input
• 4 x Line Outputs
• Dual Headphone Outputs
• ADAT Input for Expandability
• Ultra Low Latency Software Mixer
• Advanced Monitor Control
• Scrollcontrol
• True Phantom Power over USB
• USB 3.0 Bus Powered
• All Metal Design
• Free Software + Plugins
• Kensington Lock Hole

• iD14 MKII
• USB-C to USB-c Cable
• Quic Start Guide

• Official iD14 Product Overview